Bookshelf Homelab Micro Rack
prusaprinters
<p>Instructions and other files to follow, just making the STLs available for now.</p><p>EDIT: New bits of info since original posting:</p><ul><li>Print all panels back to front. For the pi panels, you will need tiny supports for the notch that fits into the supporting rail.</li><li>The bridge struts need to be mirrored- there is not a file per strut.</li><li>There IS a file per left/right right vertical struts, even though they are just mirrored.</li><li>These were the passthrough jacks used; they snap into place. https://www.amazon.ca/gp/product/B09H5JZDLH/</li><li>The single passthrough STL is for interest and is not needed to construct the rack as shown.</li><li>The supporting rail for the pi panels was not present on first upload- you will need to grab it if you downloaded the files in the first few hours.</li><li>All the trim (except for pis) is currently in one STL- will break it out when I can.</li></ul>
With this file you will be able to print Bookshelf Homelab Micro Rack with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bookshelf Homelab Micro Rack.