Boogie Dot Bomb

thingiverse

Those boogie bombs in Fortnite make me laugh. So I made a take on it. This was designed around the Amazon Dot gen 3, but would probably work for the Dot 2 too. For the Boogie Bomb: 1. Print the base - Base_ARD3_BB. 2. Print one middle ring - MidBand_MF, and fit it into the base. It's a friction fit with some clip ins. Make sure to line up the hole in the mid band with the hole in the base that has a little notch above it. 3. Put your Dot in and turn it so power can be plugged in through the hole in the mid band. 4. Print one - MidBand_FF2. Line the holes up and stack it on top of MidBand_MF. 5. Print five of the DotButtonExt2, and the rest of the files. Read the notes below for prep and assembly. 6. Press the Lever_mnt into the top of BBTop_WDOTB_SM. One of the holes is larger for orientation. 7. Push four of the peg halves of DotButtonExt2 through and couple to the other half underneath. Hopefully, the pics will help clarify this step. 8. Take the remaining peg from DotButtonExt2 and push it through the hole in LeverCap. 9. Press fit LeverCap into the rectangular holes between the buttons. It should be a snug fit. 10. Print some Base_Button-Cap, and plug holes. It's done. Paint it up as you see fit. I printed one with natural PLA and blacked out some squares so the LED ring on the Dot shows through. Painting it would look much better.