Bolts for Sliding Legolini

cults3d

I needed some bolts to use with the awesome design, Sliding Legolini. I have tried many arrow designs but all of them got at least one drawback. In my design, bolts are in vertical position so it doesn't need support. Also I connected 4 bolts with links so they can be printed with out loosing their adhesion. I strongly advice you to print the bolts in two processes (I use S3D). First will be for the bolt part up to 145mm. This section will have to be lightweight so you should use %0 infill and 2 outline perimeter shells. From the height of 145mm, you should use %100 infill and so the tip of the arrow will be heavier than the tail of it. *You should clean the links with a knife or side cutting pliers after the printing finishes. *I didn't need skirt or brim but you can do as you wish. *I have adapted the design for printing with 0.4mm nozzle *If you use regular PLA, you will have approximately 16g of 4 bolts. So for 1kg of filament you will have more than 250bolts :)