Bolts and nut coat hanger

prusaprinters

<p>A simple set of bolts and nut coat hangers.</p><p>The flange nut is simple mounted to the wall and the bolt is screwed in place. The bolts are held securely in place just by screwing them in tight. If that turns out not to be the case for your prints, simply add a drop of glue.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong> Prusa</p><p><strong>Printer:</strong> i3 MK2S</p><p><strong>Supports:</strong> No</p><p><strong>Resolution:</strong> 0.15</p><p><strong>Infill:</strong> 20%</p><p><strong>Notes:</strong></p><p>The final models that are seen in the pictures are printed in 120% scale</p><h3>Post-Printing</h3><p><strong>Paint and lacquer</strong></p><p>I did a bunch of coats of blue paint in a light and dark variant.</p><p>I probably should have used a primer, but was hoping that the paint would cover the print by itself.</p><p>After paint i gave them three coats of spray lacquer.</p>