BOBCAT remix

thingiverse

Tried printing original STLs but ran into space constraints with my RX, so I decided to create new components from scratch, including the frame and cockpit due to limitations with my CAD skills. I also redesigned the wheels to accommodate 6x3x2.5mm ball bearings, allowing for smoother spinning motion. https://youtu.be/oOOwaBE1-oQ Required parts: 2pcs LEGO tracks, part number 43903 3pcs 4.3g servos 1pcs FlySky FS-R6B receiver with case removed 1pcs Suitable transmitter (Turnigy 9X used) 2pcs 1S LIPO batteries in parallel configuration 8pcs 6x3x2.5mm bearing 4pcs M3x15mm screw 3pcs M3x12mm screw 2pcs M3x30mm screw 2pcs M nut The two driving servos need to be modified for continuous spinning, simply cut the pin protruding from the servo's pot and connect it to the RX. Adjust the pot using a small screwdriver until the motor stops. Print Settings: Printer: Malyan M200 Rafts: No Supports: Yes Resolution: 0.1 Infill: 40% Notes: Supports are required for main parts. The cab section needs to be mirrored in the slicer to create two left and right parts.