Bobbycar Seilwinde /Rope winch

thingiverse

Here is the rewritten text in American English: Here's another winch for a Bobbycar with a rest function. You'll need: 3x M3 socket head screws, 8mm long, for the hook 2x M8 socket head screws, 30mm long, for the winch (must be secured with Loctite) 4x M5 flat head screws, 16mm long, for the windendecor cover 5x M4 socket head screws, 16mm long, and for the lever, hook, and spring clip U ring, M4 size, between the lever and winch holder 1 pressure spring, outside diameter 6 mm, 25 mm long 1 paracord cord, 6mm diameter, 2m long 1 drill bit, M8, to cut a thread in the winch Optional: you can also drill the winch as the core drill does not go through completely and install an M8 threaded rod with stop nuts. Tip! Before assembling everything, make 2 knots at the end of the rope and push it through the winch. Then, you can attach the windendecor cover. You can redrill all other screws without a thread. I printed everything with a 1.2mm wall thickness. And for the winch holder support, I used 75% overhang everywhere to prevent the large hole from sagging. The rest can be printed without supports.