Bobbin (Customizable)

prusaprinters

<p>Bobbin originally designed for classic Elna sewing machines but should be customizable to work for any sewing machine. Our Elna machine came with one metal bobbin that was approximately 21 x 11 mm. This bobbin is by default 20.1 x 10.8 mm although you can adjust it using OpenSCAD or the Customizer (if it's working). I recommend using this slightly smaller size in a 1970s Elna machine as the plastic is not as slippery as metal.</p> <p>This is a two part design. It is a tight fit and hard to get apart once together. I do recommend applying a dab or two of super glue on the inside of the bigger piece. Then push together the two halves (it may take a little bit of force and you need to align them just right). After the bobbin is together, wipe the inside bore to ensure no glue remains (there is a small empty space that should trap most/all of a small amount of excess).</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>CR-10S</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> </p></p> Category: Replacement Parts