Boardgame Barrage - Wheel

thingiverse

Update 2020/03/30 ALERT The parts "V2_Barrage...stl" are designed specifically for the first version of Barrage. I'm unsure if these parts can be used for the new version (Barrage/Wasserkraft). The initial version of my files, without V2, functions perfectly for all Barrage/Wasserkraft models since it is a complete wheel. 2019/08/28 UPDATE: German: To print a complete Barrage(Wasserkraft)-wheel, you will need one part from the "V2-Barrage....stl" series. Before printing all four wheels, please test if everything works properly and if the original cardboard base still doesn't stick to the printed bottom. Only when you're certain that everything fits together correctly, glue the original cardboard base onto the bottom! To assemble it, you must remove the original rivet. The paper turnstile is no longer needed. Glue the cardboard base onto the printed bottom, insert the printed turnstile into the pin of the bottom, and fix it with the cap. In my case, it holds without needing to glue the cap. English: Based on my initial design and JuiceNeutron's (https://www.thingiverse.com/thing:3826797) design I developed a new version of the wheel (all files with "V2_Barrage..."). When you've printed all parts, first check that everything is turning properly!!! (Before you glue the Cardboard on the printed bottom!) If everything is fine, remove the original rivet from the cardboard wheel and also remove the original turnstile. Then glue the cardboard onto the "V2-Barrage-Bottom"-part. Now put the turnstile ("V2_Barrage-Turnstile...") on the pin from the lower Part. Fix it with the "V2_Barrage-Cap....". It should fit so tight that you don't have to glue it. For one wheel, you need one of each part: 1x V2_Barrage-Bottom-Original (the high of the bottom is 0,8 mm) 1x V2_Barrage-Turnstile-Original 1x V2_Barrage-Cap-Original --------------------------------- 2019/08/19 The first design is a complete printed wheel. You can use it if you have any problems with the cardboard-wheel. These wheels replace the wheel(s) in the Boardgame Barrage (Cranio Creations). I'm sorry for the Pictures and previews. I don't know why they don't work. You can see a picture below at "post printing". Using support only for the turnstile. Printer is I3 Mega. For every wheel, you need 1x Barrage-Base-wheel.stl 1x Barrage_turnstile.stl 1x Barrage-pin.stl The plate with the name of each player (Olivi, Dassler, Fontaine and Grant) is optional.