BMW Badge 78mm

prusaprinters

<p>Here is another BMW badge, this is a slight redesign of the previous badge. This badge has a diameter of <strong>78mm</strong> and is designed to replace the <strong>trunk badge</strong> of a <strong>BMW E91</strong>, I am not sure if it will fit other models as well. As far as I know the trunk badge on the E90 is 74mm, so this version will probably not fit. I will be adding a 74mm badge in the future as well.</p><p>&nbsp;</p><p>The model is intended to be printed with a <strong>single extruder</strong>, no MMU required. The parts are designed to <strong>print, assemble and glue</strong> at the end. The holder is the only part that requires <strong>support material</strong> on the print bed, all of the other parts don't require any supports. I have printed the parts at a <strong>layer height of 0.05mm </strong>in order to achieve a smooth surface of the dome, but it can be printed at any layer height, although you might have to sand the surfaces.</p><p>Color suggestions:</p><ul><li><strong>Holder</strong> - silver or white</li><li><strong>Outer piece</strong> - black</li><li><strong>Inner piece</strong> - silver or white</li><li><strong>Center piece 1 </strong>- white</li><li><strong>Center piece 2</strong> - black or blue</li><li><strong>Center pieces B1 &amp; B2</strong> - black</li></ul><p>Other versions:</p><p><a href="https://www.prusaprinters.org/prints/149773-bmw-badge-82mm">BMW Badge 82mm</a></p><p><a href="https://www.prusaprinters.org/prints/152890-bmw-badge-grommet">Badge grommets</a></p><p>Have fun printing it!</p>