BMG Wind/Aero clone BL Touch 5015 fan mounts for Sidewinder X1 V4

thingiverse

This a 4-in-1 upgrade of the Artillery Sidewinder X1 V4 with BMG Wind/Aero clone extruder, 5015 fan, BL/3D Touch auto leveling (using the Waggster mod) and BL Touch firmware to improve printing quality. This is a remix of previous mounts by making the extruder adapter more rigid, relocating the BL Touch mount, and relocating the fan mount to be closer to nozzle. Extruder and fan mount, fan duct remixed from https://www.thingiverse.com/thing:4561356 BL Touch mount remixed from https://www.thingiverse.com/thing:3972011 Update 2/1 - I had issues with the BMG Wind specifically clogging..maybe due to heat creep..and I had to upgrade the 4010 hotend fan to a 4020 hot end fan to prevent this and so far it has. Tips: 1.. Get Mellow Wind Right from aliexpress 2. print the parts using ASA for more heat resistance and add support as shown in pic 3. Follow Waggster Mod but use firmware from here https://www.thingiverse.com/thing:5157805 4. Follow 3dprinterbegginer bmg wind upgrade guide here https://3dprintbeginner.com/bmg-wind-review-sidewinder-x1-upgrade-guide/ 5. I reversed the extruder motor direction by switching the wires similar to flipping the whole connector and recommend to change the vref to .6 to avoid overheating 6. Inspect BMG wind and make sure gears are aligned with filament path otherwise movement of gears won't be smooth 7. Once board firmware and LCD firmware are updated, change estep to 415, do PID tuning, set Z offset, do a UBL mesh and save. I use UBL (versus ABL) because with SWX1 glass bed you don't really need to measure/probe bed before every print. 8. To use UBL mesh during a print add start gcode M420 S1 Z5 after G28