BlueRetro Bluetooth Controller Adapter Case

prusaprinters

<p>BlueRetro is an open source project that allows you to use modern Bluetooth based controllers on retro consoles. &nbsp;Find out more at the <a href="https://hackaday.io/project/170365-blueretro">Github </a>and <a href="https://github.com/darthcloud/BlueRetro">Hackaday </a>sites.</p><p>This case will hold a BlueRetro build using a ESP32 mounted on a 60x40mm prototype PCB. &nbsp;Through holes provide strain relief for up to four controller cables with a diameter of 4mm.</p><p>Mine is built and tested with N64 controller extension cables, but any cable with a 4mm diameter will work. &nbsp;Larger cables will require a remix or drilling out of the strain relief holes. &nbsp;Smaller cables will require a remix or a little material wrapped around the cable as a shim.</p><p>Uses 4x 10MM M2 self tapping screws for the case and 2x 5mm M2 screws for the PCB.</p><p>Prints with no support, just punch out the sacrificial layer in the holes on the top piece.</p>