Blue Yeti VIVO Mount

prusaprinters

<p>A quick mount for the Blue Yeti microphone so it can attach to a VIVO monitor stand.</p> <p>Designed for a ~35mm diameter monitor stand.</p> <p>.step and .f3d files included.</p> <h3>Print instructions</h3><h3>Category: Office Summary</h3> <p>A quick mount for the Blue Yeti microphone so it can attach to a VIVO monitor stand.</p> <p>Designed for a ~35mm diameter monitor stand.</p> <p>.step and .f3d files included.</p> <h3> Print Settings</h3> <p>I printed this with a<strong>0.8mm</strong> diameter nozzle using:</p> <ul> <li>2 walls</li> <li>Adaptive layers ranging from 0.1mm to 0.5mm</li> <li>15% gyroid infill for the base and mic side</li> <li>15% grid infill for the bolt</li> <li>Simi-flexible filament for the gasket</li> <li><p>PETG for everything else<br/> With a 0.8mm nozzle the arm is very rigid, a smaller nozzle will likely need more walls.<br/> The base and mic side will need supports around the connecting joint.<br/> You will need<strong>2x gaskets</strong>, one on each side of the connecting joint.</p> <h3>Other Additional Hardware</h3> </li> <li><p>2x M3x16mm+ screws</p> </li> <li>2x M3 nuts.</li> <li><p>The spacers, washers and thumb screws from your blue yeti.<br/> The screws and nuts are used to secure the mount in place on the monitor stand.</p> <h3>Change Log</h3> <p>18-4-2019: Add middle piece, fix chamfer on base piece.<br/> 18-4-2019: Added threads to middle piece, oops.</p> </li> </ul>