Blue yeti screws and washers

thingiverse

Blue Yeti Mic Stand Screw and Washer ==================================== Rationale --------- I purchased a blue yeti pro with stand used, but it was missing the screws and washers needed to securely hold the mic in place. I designed these parts in Onshape using measurements of the mic and stand, as well as pictures of the missing components. Source ------ https://cad.onshape.com/documents/0709ce0927634522736dbe47/w/26e047adf95025861f9a9ca3/e/75a9d8aa72790e2591d39023 Included Parts -------------- ### Test Screw Print the test screw to feel the texture on the outside of the screw cap and do a test fit with the mic and stand. The orientation is screw up, cap down. ### Screw The screw should be printed in an orientation where it screws down, cap up. You can also print it with supports. ### Washers I designed the original washers without fillets but included them both ways for your preference. They look better with a fillet, and I've included both versions. My Experience ------------- I printed all parts on a Prusa i3 mk3 using Das Filament's "Anthrazit" PLA. The infill was 20% for all parts, and the final version was printed at 0.05mm layer height. All parts feel sturdy, and I can tighten the screws enough to securely hold the mic without stripping or damaging the threads. Printer: https://shop.prusa3d.com/en/3d-printers/180-original-prusa-i3-mk3-kit.html Filament: https://www.dasfilament.de/detail/index/sArticle/105/sCategory/33