Blue snowball shock mount exterior ring remix

thingiverse

I found a Shockmount but it didn't fit my bet so I quickly made a bad cut and clamps to hold it together, making do with what I had. M3 bolts were needed, so I used 20mm bolts to be able to use the bolts as rubber band holders. You will need: - 2x Circle interior - 6 or 12 Rondelle (these are spacers from between the two interior circles) - 1 of the rest of the files (excluding Circle Exterior) from the part I remixed Additionally, you'll need: 10 M3 Bolts and Screws I used 20mm M3 screws as I wanted to use them as rubber band spots potentially. More bolts may be necessary if your holes end up not being able to thread. I didn't need any extra bolts as the plastic threaded nicely and the part holds itself together just fine. This CAD work is extremely shoddy and has lots of room for improvement, but that's not the goal. It's simply functional and that's good enough for me. Unintentional things are the fact that the clamping part with the 'big X' mounts close to the two M3 holes on the ring and the 'small x' is opposite it. Simply set the two holes of the outer ring where you want to mount the mic stand/holder. Since mine will be a 'hanging' style mic, this was my solution. If you can print 200x200, simply use the other one. I'll be releasing a thread adapter for the big threads as this was intended for use with a tripod with small camera threads. Link here: https://www.thingiverse.com/thing:3659651 Oh and that white stuff on the mic is Blu Tack since the LED is really bright and sharp, and man cave dwellers like me are sensitive.