
Blue Seas Switching Circuit Breaker Bracket
prusaprinters
<p>For my MKIII Baddeley R2D2, I wanted to mount a main power switch in an inconspicous place that was easily accessible.</p><p>My main power switch is a 40A, switching circuit breaker from <a href="https://www.bluesea.com/products/7225/A-Series_Red_Toggle_Circuit_Breaker_-_Single_Pole_40A">Blue Seas</a>. Unlike many regular circuit breakers that are only rated for a limited number of cycles, this switching breaker is rated for over 10000 cycles, and is much better suited for use as a main power switch.</p><p>I decided to mount my switch behind the front wall of the skirt - this would be within easy reach, but not be visible to spectators.</p><p>Use the #6-32 mounting screws included with the switch to secure the switch to the printed bracket. Then simply attach the bracket to your mounting surface - the holes are sized for M4 or #4 hardware.</p><p>No supports are needed to print this bracket - print it with the large hole facing down. I printed at 0.2mm layer height.</p>
With this file you will be able to print Blue Seas Switching Circuit Breaker Bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Blue Seas Switching Circuit Breaker Bracket.