BLTouch Mount for Haldis 3D v6 Extruder with Cooling Fan
thingiverse
A simple BLTouch Compatible mount for the Haldis 3D V6 Extruder with cooling fans. This was modeled specifically for this item: https://www.aliexpress.com/item/1005001704039853.html The print will need to be rotated so the largest part prints against the bed surface. **Parts List** * 2 x M3*8mm Bolts * BLTouch sensor (clones also work) **Installation** 1. Install all fans and extruder into the cooling fan mold (pictured in blue) 2. Pre-thread the holes on the fan mold (on the side that suits your printer setup) using one of the M3*8mm bolts. 3. Attach the printed BLTouch Mount on the side that suits your printer setup using the two M3*8mm bolts. 4. Attach the BLTouch Sensor to the mount. **Firmware Configuration** You will need to configure your printer firmware with the appropriate probe offsets. How to do this will vary from firmware to firmware. Below are the offset details: * X = (+/-) 37mm * Y = -2mm * Z = -2.8mm In Marlin the configuration would look like: <code>#define NOZZLE_TO_PROBE_OFFSET { - 37, - 2, - 2.8}</code>
With this file you will be able to print BLTouch Mount for Haldis 3D v6 Extruder with Cooling Fan with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on BLTouch Mount for Haldis 3D v6 Extruder with Cooling Fan.