BLTouch Mount for FLSun QQ

thingiverse

BLTouch Mount for FLSun QQ Delta Printer. You'll need 3 M3x10 screws to assemble, plus 2 screws from the BLTouch kit (or 2 M3x5) to mount it securely. To start, run a M3 tap through the holes in the top plate and the two holes on the bottom piece. If you don't have a tap, slowly insert and remove an M3 screw from each part until the threads are cut. Mounting to the effector involves unscrewing the single M3 screw underneath the logo side. Snap the mount into place and secure it with a M3x10 screw. The BLTouch's tabs will sit on top of the mount, held in place by two screws that fasten them to the mount itself. This mounting system should work with both the classic and smart versions of the BLTouch.