BLTouch Mod Vyper

thingiverse

This is a modification to install a BLTouch directly in the print head of the anycubic Vyper. The model is suitable for the Anycubic Vyper for variant A and all other variants. I have also modified the extended board in the print head to connect the BLTouch directly. This must then be adapted directly in the corresponding files. The sensor pin is connected to PB13 and the control pin to PB12. This means that the original probe can no longer be used. Furthermore, the control circuit for the original probe must be desoldered for use. To be able to use the longer screws for the hotend bracket, some filing is required (see pictures). You can find all further information on embedding with Klipper here: https://github.com/cryd-s/Vyper_extended/tree/main/0_mods/BL_Touch_Mod And for the extended Board: https://github.com/cryd-s/Vyper_extended/tree/main/1_extended_board/normal%20toolhead Attention! The pin assignment in the pictures shown is only suitable for variant A. For variant C you have to look in Github! Here you can find a new rework of a belt tensioner to use the entire print area after installing this Mod: https://www.thingiverse.com/thing:5499573 For further questions, please contact me. Have fun. P.S.: It works perfectly even with enclosure and high temperatures!