Block Printing Press

myminifactory

This is a Block Printing Press designed for producing small prints approximately 10cm by 10cm in size. Extra Hardware: * 4 x 6" threaded rods with a diameter of 10-32 + Used for Height Adjustment * 4 x wingnuts with a diameter of 10-32 + Utilized for Height Adjustment * 8 x nuts with a diameter of 10-32 + Employed for Height Adjustment * 4 x lock washers with a gauge of 10 + Integrated into the Height Adjustment system * 1 x threaded rod with a diameter of 10-24 and a length of 12" + Installed as the Lower Axel * 4 x nuts with a diameter of 10-24 + Secured to the Lower Axel To construct the height adjustment screws, lock washers were sandwiched between two nuts. The support legs and lower height adjustment brackets were secured in place using a mild adhesive. Improvements can be made to eliminate the use of adhesives. A glue was used to secure the drum axle and knob. Commercial equivalents for this press range from $50 for non-roller presses to $300 for larger roller types, which incorporate rollers. The OpenScad file used to generate all parts is included if customizations or adjustments are necessary.