Blaston Trophy (from the VR game Blaston)

prusaprinters

Hello, I made this model for a VR Lan event in Italy as the prize for winning the Blaston VR tournament. (OMINIUM LAN) As you can see from the picture I made this model as big as I could and therefore had to break it down into multiple parts.The stl models are quite small but all are scalable (I think I scaled to 400% but don't remember) just ensure all scaled to the same size % from the orginal.I used .18 for the base with 3 walls.all other parts were .12 with 3 walls, I think I used 15% gyroid infill but this preference.Print the Cup with top on the bed, no supports were necessary.Pillar V2 will print but I found cutting it (pillar top/bottom) and gluing together made the whole thing much more stable)The handles were printed flat on the bed and I used ironing for a nice surface finish.The Plaque still has the logo from the evet on it but just cut it off or create a new plaque using your slicers built in object creation just make sure it'll fit into the recess on the base.I found printing the plaque laid down with no top layers and 20% concentric infill gave an interesting and aesthetically pleasing finish to it  (use a modifier with top layers and 100% infill for whatever logo/text you decide to put on top to achieve the same effect that can be seen in the Pic).I added the Cup.obj so you can see the full model but I don't recommend printing from this model. and don't forget to go slow for the outer walls if you're using silk filament for that shiny finish.(Note: 'pillartopcut' was added as I broke the original and repaired it using pla gloop-might come in handy) Bonus: the coin is also the digital currency from the game I filled the cup with a load of these - cut the coin in half and glue together)Happy printing :)