Blast-Tercel Gunship (28mm) - rear parts

thingiverse

Hi all. Here is another nice model for your 28mm armies! The original model was created by Nexu. I've reworked the design to make it easily printable with many details added, including a cockpit and small features on the hull. Working doors are also included at the front and rear. The side doors are compatible with ank doors like this one: https://www.thingiverse.com/thing:1431768/#files Check out our Patreon for more awesome designs: https://www.patreon.com/themakerscult I made some changes recently! I added a pack for the front parts here: https://www.thingiverse.com/thing:2538713 I finally finished remodelling the main part of the ship in CREO, and now it needs to be cut into smaller parts. It's going to look really nice, and it's only 2Mb! I added weapons recently. Print them as oriented. Project finished for now! I made some more changes! I added top_cut 1 - 4 for small printers on December 30th. On April 10th, I added a cross-shaped support under the hull to mount a stem. Some parts will need to be printed twice: top wing 1 & 2, weapons, lower wing, and rear land pad 1 & 2. The intake, exhaust, middle reactor, and some heavy parts also need to be printed twice. Assembly requires Ø4mm pins and a 1x10x5mm sheet between hull1&2. Use some 1.75mm filament as an axis for the back door and some 1mm metal wire (paperclip) for the front door. Print this model as oriented, with some supports here and there. It's not too difficult to print, but some parts are quite big and long. Check out the remix section for conversions of side turrets. For interior details, you can use Harnesses and control panels from this design: https://www.thingiverse.com/thing:446893 Please consider sending tips if you like my printable models! I want to clarify that I didn't copy any copyrighted products. These models are freehand creations in 3D modeling software for personal use only, and should not be sold. If it causes copyright issues, I'll remove it!