Blast-Tercel Gunship (28mm) - rear parts

cults3d

Hi everyone! Here's another awesome model for your 28mm armies. The original design is from Nexu. I've reworked the model to make it easily printable and added many details, including a cockpit and small features on the hull, as well as working doors at the front and rear. The side doors are compatible with anker doors like this one: https://www.thingiverse.com/thing:1431768/#files **Check out our Patreon for more amazing designs:**https://www.patreon.com/themakerscult Edit 17/09/2017: The front parts pack is now available here: https://www.thingiverse.com/thing:2538713 Edit 20/09: I've finally finished remodelling the main part of the ship in CREO, and it's looking great! It's a bit heavy, but it should print nicely once cut into smaller parts. Edit 03/10/2017: I've added some new weapons to the model. Make sure to print them as oriented. Project finished for now! Edit 30/12/2017: I've added some support parts called top_cut 1-4, which are suitable for small printers. Edit 10/04/2018: I've added a cross-shaped support that can be glued under the hull to mount a stem. Edit 23/04/2018: Some heavy parts have been remeshed and symmetrical parts with the _sym suffix have been added. Some parts will need to be printed twice, including: * Top wing 1 & 2 * Weapons * Lower wing * Rear land pad 1 & 2 These parts also need to be printed twice: * Intake * Exhaust * Middle reactor Assembly requires Ø4mm pins and a 1x10x5mm sheet between hull1&2. For the back door, use some 1.75mm filament as axis, while for the front door, you'll need some 1mm metal wire (like a paperclip). Print the model with supports here and there. Nothing is difficult to print in this project, but some parts are quite big and long. Check out the remix section for conversions, including two types of side turrets. For interior details, you can use Harnesses and control panels from this design: https://www.thingiverse.com/thing:446893 **Please consider sending tips if you like my printable models!** Note: Copyright infringement is not intended. The parts are created freehand in 3D modeling software, and no copyrighted products have been scanned or copied in any way. These models are for personal use only as proxies and should never be sold. If it causes copyright issues, I will remove it.