Blair Chanter Bag Adaptor

prusaprinters

<p>This item is in no way approved or associated with Blair Bagpipes. This is something that I created for my personal use. I encourage you to buy official Blair Chanter products.</p> <p>This is a work in progress....</p> <p>Being the proud owner of a new Blair Electronic Chanter and a 3d printer combined with a desire not to spend $120 on an official Blair pipe bag I fired up the old Fusion to see what I could come up with.</p> <p>This is a stock and an adaptor to plug a chanter into a bag. I made my own "pipe bag" which is really just a fancy pillow. The Chanter Stock has a slot for a hose clamp to attach it to the "bag". The Adapter is threaded to 10mm which should be the correct size for the chanter.</p> <p>I printed this in SUNLU ABS on my Da Vinci 1.0. I then vapor polished the stock to give in a shiny and smooth appearance. The adapter I left rough, to avoid any shrinkage. I used some bagpipe hemp I had laying around to fit the adapter into the stock snugly.</p> <p>The stock has a small cutout to allow you to run an audio cable through the "bag" and out the stock.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>XYZprinting</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>da Vinci 1.0 Pro 3in1</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>.15</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>50</p></div> <p><strong>Filament:</strong> SUNLU ABS Black/Red</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Any filament will do but I work with ABS so I can vapor polish. Color doesn't matter, use what you like.</p></div> </p></p></p> Category: Other