Bladefuse holder with flying leads - higher tolerance
thingiverse
This is a remix of the design from Andi999. Thank you Andi for your Design! When i printed the Fuse holder from Andi999, the parts did not fit together due to the bad settings of my printer. So I reduced the edge on the bottom by 0.3 mm in all directions. Even if it wobbles a little now, it is ensured that the parts fit together well. The File 17075_1.STL was not changed by me. If you like my design, feel free to support my by sending me a tip via PayPal. Here in addition the explanation from Andi999: This is a fuseholder for standard automotive blade fuses (19,1x5,1x18,8 mm). It consists of two parts that are mounted using 3 self tapping screws. two 6,3 mm blade receptacles are used to contact the fuse. What else is need: Wire (make sure the cross sections suites the fuse amperage) 6,3 blade receptacles non isolated Screws: 2,9x9,5 mm self tapping countersink Crimping tool rework after printing: countersinks had to be enlarged. Further work: design an attached lid. design fastener print in one piece with enclosed receptacles.
With this file you will be able to print Bladefuse holder with flying leads - higher tolerance with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bladefuse holder with flying leads - higher tolerance.