
Blackcoin Raspberry Pi 3 Case
thingiverse
Blackcoin Raspberry Pi 3 (Two Piece) Case https://blackcoin.co No nuts and bolts required - the ras pi board simply slides into the Board Tray, and the Sleeve smoothly slides over the Board Tray. A tab clicks into place, securing the two pieces together. The underside of the Board Tray features two slots, a full inch apart, for sliding the assembled box onto wall mounting screws. The two parts are designed with a subtle tolerance, allowing them to slide together and apart with minimal effort. ***When first used, the two sections will fit snugly together. It is recommended that you assemble and separate them several times without a Raspberry Pi board inside to loosen them up. Once loose, you can easily insert the board.*** *****The Box remains a work in progress, so use at your own risk. The vented sleeve is suggested for 24/7 staking, but be aware that it has not been tested to see if the board overheats with prolonged use (Regular monitoring of your board temperature is essential).***** Blackcoin High Five Donation Address: BBsmwHWbLeWKjXBAGYN8DuCLUbVhhbvg93 *******No donation is necessary - just a high five or well done type of thing :)******* Check Out A Blackcoin Private Key Gift Coin: https://www.thingiverse.com/thing:2751071 *********>>>Files now include two types of desk stand that fit into the screw mount slots, and a wall mount for use with double sided tape or nails (for times that you don't want to mount straight to screws in a wall)<<<********
With this file you will be able to print Blackcoin Raspberry Pi 3 Case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Blackcoin Raspberry Pi 3 Case.