BL Touch height mounting calibration cube
thingiverse
The BL Touch body should be installed precisely 8.0mm to 8.5mm above the nozzle tip. This cube is perfectly calibrated at 8.25mm. Double-check with calipers to ensure your printer accurately printed the height. To begin, simply print this cube and position it under your BL Touch, securing it loosely with mounting screws. Next, lower your Z-axis until your nozzle touches the bed gently. As you do this, the probe should pass through the hole in the cube, and the body should make contact with the top surface. Your height is now calibrated, allowing you to tighten your BL Touch mounting screws. Please note that this cube assumes your bed is reasonably level. For a more comprehensive understanding of getting a BL Touch up and running, consult my complete BL Touch installation guide at https://www.thingiverse.com/thing:3564695
With this file you will be able to print BL Touch height mounting calibration cube with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on BL Touch height mounting calibration cube.