Bitfenix 230mm x 200mm Fan guard with Bitfenix symbol

myminifactory

Bitfenix 230mm x 200mm Fan Guard with Bitfenix Symbol This fan guard is designed to fit perfectly onto a 200x200 print bed, and its four quarters can be printed separately to achieve the desired size. Each quarter takes approximately two hours to print. The design features a prominent BitFenix logo, which was created by Timo-chan and can be found on Tinkercad. While I have not conducted any tests to confirm the accuracy of the design, it is worth noting that the model's large size may require a considerable printing area. A workaround for this issue is available in the video provided below. Old One Complete Model without Bitfenix Symbol This fan guard features a distinct design that differs from the one shown in the video. However, when I attempted to print the STL file, it exceeded my build plate's dimensions, even with the suggested workaround. I decided to abandon this file and use the one presented in the video instead. Unfortunately, the hole positions on that model were incorrect, so I opted for a temporary solution using hot glue. Printing Issues When printing parts that should fit within the build area but are displayed in grey due to Cura's safety margin, you may encounter difficulties. One work-around is available online, which involves editing the G-Code to adjust the part's position. I have successfully employed this method with another large model that was initially too big for my printer. By making a minor adjustment to the max X and Y settings in Cura, I was able to print the model without any issues. For those experiencing similar problems, you can find more information on this workaround at the provided URL. Acknowledgement I would like to acknowledge the creator of this work-around, which is available online.