Bit holder for toolshop 8v Lithium-ion drill

prusaprinters

<p>I got tired of digging in my pockets for all the torx or hex head, or square bit or philips or flat head bits when I was disassembling or assembling random hardware. I found Matt Beechan's bit holder at <a href="https://www.thingiverse.com/thing:360803">https://www.thingiverse.com/thing:360803</a>, and remixed it so that it would clip into the bit holder at the back of the drill, and loop over the front.</p> <p>This is a work in progress, as it could stand to be a milimeter wider in front, and the whole thing tends to pop out and drop onto your hand if you hold the drill upside down and shake it.</p> <p>That said, it should hold 24 bits, or in my case, 14 bits, and a nut driver, and a bunch of leftover spaces.</p> <p>This is now updated to have a brace behind the bit that clips into the spring holder for the single combo bit. I found that pushing the bits in and out had an unfortunate tendency to break the bond at the crossbar.</p> <p>To put this on the drill, put the front brace on the drill first, then put in the crossbar.</p> <p>Put longer bits in the front, where they won't bump into the bottom of your hand.</p> <p>This does not block the charging port.</p> <p>STL file and freecad source file included. I tried mucking with this in tinkercad, but for some reason, it doesn't want to import the bitholder portion properly.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Rigidbot/Reliabuild</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div> <p><strong>Infill:</strong></p> <p>35</p> <p><strong>Filament:</strong></p> Solutech PLA <p>blue</p> </p></p> Category: Tool Holders & Boxes