BISSELL® SpotClean Pro™ Pet attachment/head holder

thingiverse

Ready to slice and print with no adjustment needed, but do you bb. This is the final version of a custom holder I made for the extra head that comes with the BISSELL® SpotClean Pro™ Pet. The machine doesn't come with anywhere to store the extra head, and I didn't want to lose it so I made this to keep them together. This will also fit a regular BISSELL® SpotClean Pro™ and should fit any head meant for either machine since they're identical in the relevant dimensions, afaik. Installation: Place the machine on the floor or other sturdy surface and slide the holder over the topmost three-prong-bit sticking out of the hose reel. Push straight down until the clips overcome the lip of the prong. Wiggle gently and inspect to ensure a tight fit and that all the clips have seated behind the lip. Done. The clips are thick, don't be afraid to wiggle a bit and push harder to get them to seat properly. If you can't print very small overhangs/bridges without sag, you may want to use supports to ensure the bottoms of the clips come out flat, but they came out flat enough for me on a stock Ender 3 Pro. No real idea what people need so STL, OBJ, STEP, and SKP included. Measured all dimensions with some calipers and threw this together in Fusion 360 based on those measurements. I'm sure there's a million better ways to do it, but this worked well for me so I hope it works for you too. Lemme know if there's any issues or if you remix it and improve it or something.