Bissell Pet Vacuum Wand End Fix

cults3d

Update, lost my spring pin and it eventually destroys the holes with the movement it has, to fix this I removed the button from the handle and designed and printed a pin to fix the handle to the wand/tube... i have added the pin to the files as well save the bottom plastic from the original tube by drilling out the rivets. For the original design - place plastic piece from original tube on the printed tube then drill holes with a 2mm or 3mm diameter drill bit and screw in some M3 screws with counter sunk heads. For V2, 3mm holes have been added so you should be able to just screw in 3mm screws with countersunk heads or u could insert some heat sink thread inserts for M3 screws. If this becomes an issue I will change home diameters for mounting the original plastic piece to 2mm or I’ll just design the tube with the plastic pieces dimensions built in. In order to use the handle release button from the original set up, you’ll need to figure out the spring pin, I extended mine but it broke in the long run. I now use the pin included in the files