Bird House Cathedral style 3D print model

cgtrader

Bird House Cathedral style \n\nSave a haven for small birds and give them a place to eat. Four sides allow them easy entry, and the Tower is equipped with a seed dispenser that can also be filled with food, ensuring all birds get a chance to feed without being excluded.\n\nInspired by Gothic Cathedral Architecture, this Bird Feeder was created with a unique twist to make it a birdhouse-like design.\n\nThe Birdhouse can be placed on the ground or hung from its Tower. A removable bottom floor allows for easy cleaning.\n\nWhen assembling the model, use a thin glue and follow the instructions found in the included Manual. Alternatively, refer to the 12 screen shots accompanying the photos for guidance.\n\nThe STL files provided have been tested with FDM 3D Printers using the following settings:\n\n0.4mm Nozzle\n20% layer resolution /layer height 0.2 mm\nFour top and bottom layers\nThree wall layers (use two layers for smaller parts like windows)\ninfill 20% or use 15% depending on the part\nSkirt: Two lines required.\n\nThese settings yield approximately \n\nWhite PLA: around 2900g of material \nGreen PLA: around 550g of material \nPET-G: only about 10 grams are needed.\n\nWith these Print Speed Settings, it should take around 313 hours \nprint speed 38mm/s \nwall speed 30mm/s \ninwall 30mm/s\ntop/bottom 25mm/s \ntravel 60 mm/s \ninitial layer 25mm/s \nretract distance 6.5 mm\n\nFeel free to ask if you have any questions!