BIQU Microprobe Mount for Qidi X3 Series. Pictures are fitted to X-Smart 3

thingiverse

Mount for BIQU Microprobe on Qidi X3 Series (X-Smart3 X-Plus3).Mounts to the left side rather than the right to prevent interference with the hot end fan. Goes behind wires going to hot end.Tool-head Board probe wiring is.2pin Socket:Left = Ground (Black of 2pin plug)Right = Sensor (White of 2pin plug)3pin Socket:Left = 5v (Red of 3pin plug)Middle = Ground (Black of 3pin plug)Right = Servo (Yellow of 3pin plug)Important: You need to swap the Black and Red of the 3pin plug on the microprobe over.Needs modifications to the printer.cfg file. Please see below for guidance (I have re-wrote and split my config up)Config information is located here:https://github.com/SmileyMan/Qidi-X-Smart-3-Klipper-ConfigMy probe config (I have renamed Tool-head Board from MKS_THR to Toolhead):https://github.com/SmileyMan/Qidi-X-Smart-3-Klipper-Config/blob/main/sub_config/probe.cfgMy bed config:https://github.com/SmileyMan/Qidi-X-Smart-3-Klipper-Config/blob/main/sub_config/bed.cfgMy homing override code - This ensures Y is homed first and backed off 15mm so micro probe is not pushed against the printer frame:https://github.com/SmileyMan/Qidi-X-Smart-3-Klipper-Config/blob/main/sub_config/homing.cfg