BIQU H2 Mount and Fanduct for Tronxy XY-2 Pro

thingiverse

This is a BIQU H2 Mount for the tronxy XY-2 Pro and a perfect fanduct based on the OmniaDrop from www.dropeffect.com. (thanks for the permission!) At the back of the H2 is a tunnel for the heater- and the thermistor-cable. At the edges are tunnel for zipties if you want to use them. Steps for the installation: 0. !important! attach the motor to the H2 with cable-Plug upwards 1. Install the fanduct to the H2 (use the tunnel for the blower-cable) or skip if you use another blower-concept 2. remove the back-bottom screw from the hotend-fan 3. put the upper Pulley-Screws into the mount-holes and prepare the zipties through the holes 4. put the cables of the heater cartridge and thermistor to the back of the H2 and into the tunnel 5. put the H2 to the mount. --> !important! there is a nose at the fanduct thats fits into the mountplate 6. re-screw the hotend-fan with the hole on the mountplate and screw the plate onto the backside to the H2 with two m3-screws. 7. Install the probe with two m3-hexnuts and screws 8. Now put the Mount-plate to the original metal-plate and screw the pulleys back by simultaneous fixing it back to the X-Axis. 9. Fix all cables with the zipties 10. Don't forget to adjust the steps of the extruder. Have Fun :) If you like my mod please honor my work and subscribe my socialmedia profiles: Youtube: https://youtube.com/3dgeneriert Instagram: https://www.instagram.com/3dgeneriert/ Facebook: https://www.facebook.com/3Dgeneriert-102114258034357