Biqu H2 for Artillery Sidewinder or Genius

thingiverse

**EDIT: I made a new version, which includes a BLtouch mount in the back and doesn't loose any printable area. https://www.thingiverse.com/thing:5385039 If you don't have a bltouch, I would recommend this remix https://www.thingiverse.com/thing:5384889** A Biqu H2 mount for the Artillery Genius and Sidewinder. It has been working great for a few months now. I wouldn't recommend PLA, because the extruder can get quite hot. It requires some M3 Nuts to be able to mount the PCB, and a few M3 scews to mount the Biqu H2. There is the option to also scew the extruder from the back of the mount, but I wouldn't recommend it, because you would have to remove the whole printed mount, if you wanted to open the extruder because of jam or something. For the two top nuts and the one bottom nut, washers can be installed to even out the pressure, but it isn't needed. The stock endstop still works, but this extruder upgrade sadly looses 20mm in printable area in X. Make sure the extruder cable connector shows upwards, so you can use the stock short cable from the old extruder. Make sure to set retraction distance to 0.4mm, retractions speed to 4mm/s, detraction to 40mm/s in your slicer. I used this (https://cults3d.com/en/3d-model/various/the-claw-v3-1-slightly-modified-for-better-clearances) fan mount for the 5015 fan and this (https://www.thingiverse.com/thing:4743701) BL-Touch Mount.