Bikepacking suspension bottle cage
prusaprinters
<p>This bottle cage will fit any Nalgene 1L (32 oz) water bottle, it goes on the suspension fork and will fit a FOX 34 or any 41mm diameter lowers suspension.</p><p>The bottle cage requires 3 printed parts, it was printed in nylon with 35% infill and 2 contours, it seems sturdy enough to handle a full water bottle with no problem, but you can add more infill or contours if you'd like. I dropped my bike from 0.5m and the bottle didn't come out of the cage.</p><p> </p><p>Hardware required:</p><ul><li>4 M4-0.7 x 16mm screws (one for the stop and three for the clamp)</li><li>3 M4 nuts (for the clamp)</li><li>2.3mm steel rod (you can get it from a thick paper clip or a welding rod, this is for hinge mechanism)</li></ul><p> </p><p>Check out my other bikepacking design </p><p>https://www.prusaprinters.org/prints/135055-bikepacking-handlebar-bag-straps</p>
With this file you will be able to print Bikepacking suspension bottle cage with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bikepacking suspension bottle cage.