Bike Stem Battery Holder

youmagine

Matching Powerpack: http://www.emag.ro/acumulator-extern-a-5200-mah-black-blue-pbm52-bl/pd/DHZJMMBBM/ GitHub Project: https://github.com/thenoizz/bike-brackets/tree/master/APlus_PBM52-B Notes: Use Colorfabb XT, ABS or similar materials; PLA will degrade in sunlight. You don't need a fan to print this project. Print with at least 20% infill for rapid prints, but 40% is even better. Enable brim for strong adhesion. No supports are required. Print at 0.1 mm layer thickness.