Bike pump frame clip - straight mount (not offset)

prusaprinters

<p>Frame-mountable clip for bike pump, designed to mount straight to bidon mounting points, not flush behind bidon carrier. Suits 22mm diameter pumps.</p><p>I only use one bottle cage, but both my mini-pumps only came with offset mount clips that are designed to go under cage mounts, therefore sticking out to the side of the frame. I wanted improved aerodynamics and aesthetics.</p><p>The mount has screw holes placed to make the clip lower on the frame, but the clip could also be mounted upside down.</p><p>The mount has a radius of 32mm on the back assuming that it will be mounted to the seat tube. It can be printed with supports. If you need to mount to a flat surface, just leave supports in place.</p><p>I suggest printing it flat on the bed with tree supports. There will be some separation required later, but in my experience it came out pretty clean.</p><p>If you wish to view or remix/resize the design, here it is:</p><p><a href="https://cad.onshape.com/documents/89cac0fc1ba5ef0846f4ed0a/w/113703cd19302ba096aa04f0/e/2bb8933001c31bb354cddb5c">https://cad.onshape.com/documents/89cac0fc1ba5ef0846f4ed0a/w/113703cd19302ba096aa04f0/e/2bb8933001c31bb354cddb5c</a></p><p>The design is intended to be used with a velcro tie strap which is standard with the mounts that come with many mini pumps. The clip holds the pump strongly enough to be used without the velcro tie.</p>