Bike CO2 holder 16g & 25g (27,2mm/30,9mm/31,6mm/37mm)

prusaprinters

<p>Bike CO2 mount to be used on a 36,76mm diameter tube, but has been tested on a 31mm seatpost (look the images) with no problem.</p> <p><strong>UPDATE (22/01/2022)</strong>: Added 25g CO2 holder for 31,6mm, 30,9mm and 27,2mm seat post. The measured 25g CO2 cartridges have a diameter of 25,5mm. Updated STL files of 16g CO2 cartridges for 31,6mm and 27,2mm seat posts to V2.</p> <p><strong>UPDATE (28/05/2020)</strong>: Updated STL files, added .f3d file and also 27,2mm diameter CO2 holder.</p> <p><strong>NOTE 1</strong>: It has been designed for TOPEAK 16g cartridges with a diameter of 22,2mm, if yours has another diameter post a comment. If the diameter is another one it won't fit correctly.</p> <p><strong>NOTE 2</strong>: It can handle up to a 24mm wide strap. I tested with a 20mm wide and 25cm long strap (look at the photos).</p> <p>If you need another bike tube diameter just post a comment, i have no problem to upload as many as you want.</p> <p>The design has been tested and is very though, won't break easilly.</p> <p><strong>The thread is 3/8-24 UNF</strong></p> <h3>Print Settings</h3> <ul> <li>Rafts are not totally necessary, but I had problems with the supports.</li> <li>Try to use low resolution in order to have an accurate thread for the cartridges, i have tested with 0.16mm and it's fine.</li> <li>5 wall lines are recommended for better stiffness.</li> </ul> <p>In CURA the "Layer view" should look like this:</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>CR-10S</p></div> <p><strong>Rafts:</strong></p> <p>Yes</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.16</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>50%</p></div> <p><strong>Filament:</strong> eSUN PLA+ White How I Designed This ===================</p> <p>I used a caliper and did some prototypes in Autodesk Fusion 360.</p> </p></p></p> Category: Sport & Outdoors