BigTreeTech ZSYong Mix Voron Afterburner Toolhead

thingiverse

BigTreeTech ZSYong Mix Voron Afterburner Toolhead These parts will allow to mount a BTT ZSYong Mix as a Voron Afterburner toolhead. It's a complete redisign, inspired by the standard Voron Mosquito toolhead. You shall be able to use your ZSYong Mix as a dual bowden or direct+bowden setup, depending on the configuration of your afterburner. One filament entry will have to be bowden. There is no modification required on your Afterburner, but expect having to adjust your Z-Probe 6mm lower, since the toolhead is higher than the standard ones. Mounting to the AB will be done by M3x8 or M3x6 screws, which shall stay captive on the toolhead. You'll need a long allen key to screw them through the front part. I have mounted the toolhead successfully, and had no issue priming the nozzle on both paths using a Voron Clockwork remotely mounted as bowden. Printing works like a charm on my dual Clockwork Bowden 80cm setup. Enjoy your prints!