BIGTREETECH Smart Filament Sensor 3030 Mount

prusaprinters

<p>This mount requires unscrewing the back of the sensor housing and replacing the regular screws with M3x12mm screws to attach the sensor housing to this mounting plate. You then can attach it to your 3030 printer frame using two M5x8mm screws and M5 3030 T-Nuts.&nbsp;</p><p>Should work to attach to any 3030 frame printer, like a Hypercube Evolution (my printer), RatRig V-Core 3, etc.. I've included the original CAD files for remixing. Should be mountable as-is on 2020 extrusion printers as well with matching T-nuts, but you may wish to trim it down a little more so the plate doesn't stick out as much.</p><p>Print with the two big holes facing up with no supports. The smaller holes have 0.2mm sacrificial layers you can either drill out or screw through.</p><p>Note: Photo on my printer doesn't reflect the fillets on the ends that I added after the print for my unit, as I decided after that made it look better and used less filament.</p><p>Inspired by <a href="https://www.thingiverse.com/thing:5156960">BigTreeTech smart filament sensor holder for 30x30 aluminium profiles by aJ_Berlin - Thingiverse</a>.</p>