BigTreeTech (BTT) Eddy probe for Diamond Mount

prusaprinters

This is the BigTreeTech Eddy probe mount for the TwoTrees Sapphire Plus (SP-5) and Sapphire Pro (SP-3). The original Diamond Mount doesn't include this probe mount. Please follow the material print guidelines for the Diamond Mount specified in the original instructions. I am using the V6 Bambu hotend, but this should work with any standard hotend that fits the Diamond Mount.You will need supports when printing, I have supplied pictures of where I used them. You will need this in your startup macro to set the height at what you need. The best way I have found to do this is to do a test print and live adjust Z to the height you need and then take that number and plug it into this line and it will set it for you at the beginning of every print.SET_GCODE_OFFSET Z=-0.xx MOVE=1You will have to set this for every sheet that you use. Mine is different between even the springsteel side and PEI side of the same sheet. I comment out the other sheets.  ===example===   #SET_GCODE_OFFSET Z=-0.26 MOVE=1 #PEI Side   #SET_GCODE_OFFSET Z=-0.5 MOVE=1 #Steel Side   SET_GCODE_OFFSET Z=0.2 MOVE=1 #Dobstfy Sticker Plate===example===Diamond Mounthttps://www.printables.com/model/169465-the-diamond-mount