Big Pusher

prusaprinters

<p>Big push-button that fits most regular soap dispensers and allows you to use them handsfree.</p> <p>I wanted to design a push-button that is easily adaptable to fit on all different kinds of regularly available soap dispensers, and allows you to utilize the dispenser with your lower arm or wrist.</p> <p>The print consists of a base (lower-part) that fits around the thread of the bottle, a push-button (shaft &amp; top) and 3 different types of 'pushers' to accommodate in the different heights and range of travel of the dispensers.</p> <p>If needed, a zip-tie can be used to secure the base to the bottle.</p> <p>All part should snap-fit together. You can use some CA-glue if you'd like.</p> <h3>Print instructions</h3><p>PETG<br/> 0.2 Layer height.<br/> 10% infill, Gyroid or Grid.</p> <p><strong>No support needed</strong>, except for the wide pusher (top-push-wide.stl) that has a slight concave shape. When printing in PETG I found it useful to change the Support Material --&gt; modify z distance to '0.2 mm'. This makes it easier to remove the support material.</p>