Big Drawer for Prusa Mini Base

prusaprinters

<p>This drawer is an add-on for David Warboss' excellent <a href="https://www.prusaprinters.org/prints/63483">Prusa Mini Base</a>. The drawer is now printable on, and optimized for, the Prusa Mini. Surprisingly, it is almost as big as my original version. The design is basically a mix of what angles I was able to retain from the Mini Base, and the limitations of the Mini's 180x180x180 print volume.</p><p>I left the large central rectangular space open for use as either a large bin, or to allow for “inserts” and such to be easily designed and dropped-in without having to remix and spend a day printing another drawer. Since the bottom sides have two 45 degree angles on them, I made them into shelves for nozzles and whatnot.</p><p><strong>Printing on the Prusa Mini:</strong></p><ul><li>In PrusaSlicer, lay the drawer on its back, rotate 45 degrees, then center</li><li>Layer height 0.2mm</li><li>Print Settings &gt; Layers and Perimeters &gt; Perimeters = 3</li><li>Print Settings &gt; Advanced &gt; Perimeters &gt; 0.45mm</li><li>Print Settings &gt; Advanced &gt; External Perimeters &gt; 0.45mm</li><li>No Brim or Skirt</li><li>No Supports</li><li>Infill 10-20%</li></ul><p><strong>Changelog:</strong></p><p><strong>v1.1</strong> - 1.7.2021 Added nozzle shelf. Widened rail slots.</p>