Big Bubba Rocket Kit

thingiverse

This is a rocket kit to make a fat body model rocket. I call it Big Bubba. There are endless combinations that you can make with this kit. Only your imagination and how much print time you want to spend. First choose a Motor mount base. You can use the plain motor mount outer tube, or the one that has integrated fins. If you use the plain outer mount tube, you would be using the slip on fin section to add fins. You can even install the motor mount into a body tube directly. Next you need to assemble the motor mount. Take the motor mount inner, the Motor mount locking tabs, and the Motor Mount stop. The mount lock tabs gets glued into the bottom of the inner motor tube with CA glue, with the tabs to the bottom. Next, decide what size engine it will use. D size or E size. You will need one motor to set the placement of the motor stop. Insert the motor into the motor mount cap, slide the motor stop into the tube. Put some glue inside the tube, and then push the motor into the tube, sliding the motor stop into place until you can lock the cap in. Next install the mount rings, and install into the large tube. Mix and match parts to create your own design.