Bicycle Aerobar Spacer compatible with Profile Design
prusaprinters
Lift up your aerobar and save your back!Should be compatible with Profile Design aerobars.Tested with Profile Design Legacy II. Handlebar diameter: 31,8mmPrint and use at your own risk! Additional parts requiredYou need 4 x M6 screws to replace the original screws with longer ones.The original screw of the Profile Design Legacy II was 15mm. To figure out the required length of the screws, you need to add 15mm to the spacer height:Spacer height (mm)Screw length (mm)52010251530203530454055506560757085Additionally, you might need to use some washers if the screw length doesn't match perfectly. Print settingsnozzle size: 0.4mmlayer height: 0.2mm material: PETG (for increased resistance against heat from the sun)infill: 80%supports: no (tested on an Ender 3 V2) Tested 40mm version printed with the above settings with a Profile Design Legacy IIon a 300km mostly gravel trackNo issues. Spacers still look in very good shape.Print and use at your own risk!
With this file you will be able to print Bicycle Aerobar Spacer compatible with Profile Design with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bicycle Aerobar Spacer compatible with Profile Design.