BIBO 2 - Simple Door Latch

thingiverse

BIBO 2 - Simple Door Latch ========================== I got fed up with my BIBO 2 printer's door always hanging slightly ajar, so I crafted this uncomplicated friction-based latch. --- The latch secures to the door using the same bolts that hold on the handle. The latch is designed to attach on the inside of the acrylic door with the curve pointing downwards. I swapped out the stock plastic bolts for M4x12 alloy steel socket cap bolts because I preferred their look. The three attached models are: * BIBO2_Door_Latch_Basic This is the basic latch. Print this model if you only need it for functional purposes. * BIBO2_Door_Latch_Pedestal This is the basic latch with added pedestals on each end. Use this model to remix the latch with your own decorative design. * BIBO2_Door_Latch_NM-Logo_Print-Ready This is the pedestal version of the latch with the Noah Miller Design logo integrated into it. This is included as an example of how you might remix the pedestal latch with your own design.