Bevel Block

grabcad

Designing a beveled block from scratch within the CAD program CATIA V5 requires careful planning and execution. To begin, launch the CATIA V5 software and create a new part file by clicking on "File" then selecting "New Part." Name your project accordingly, for instance, "Bevel Block Design." Next, navigate to the "Part Design Workbench" where you can start sketching the beveled block's geometry. Use the "Sketcher" tool to draw two parallel lines that will serve as the base and top edges of the block. Ensure these lines are perpendicular to each other. Subsequently, create a new sketch for the bevel itself by drawing an arc connecting the two parallel lines. The arc should be positioned at an angle that you desire for your beveled edge. You can use the "Move" command to position it correctly. Now, extrude this sketch into a solid body using the "Extrude" tool. This will give you the basic shape of your beveled block. If needed, you can also add fillets or chamfers to the edges for aesthetic purposes or manufacturing requirements. To finalize your design, go back to the "Part Design Workbench" and use the "Datum" feature to create a reference plane at the top surface of your block. This will enable you to precisely locate the position of any future features you might add. With this process, you've successfully designed a beveled block in CATIA V5. Remember to save your work regularly as you continue working on your project.