Betrayal Legacy inserts

prusaprinters

<p>This is a collection of storage containers for the parts of Betrayal Legacy. I found that the insert that comes with the box to be completely useless, so I'm making my own.</p> <p>The two halves of the tile plank holder are meant to be clamped and glued together with superglue. I was able to print both halves at once on my MK3 by not printing a skirt/brim and closely arranging the pieces together.</p> <p>The deck tray is used to hold the Purgatory and Legacy (one part at a time) decks. The lid should be held in place with a rubber band.</p> <p>The Items/Events/Omens/Extras tray is used to make it easy to draw and/or "bury" those cards. You can print it with 0% infill. Your slicer will probably not print the divider tips all the way to the top -- that's okay. Glue the left and right halves together. The "extras" slot is for a fourth set of cards that you will discover later in the game.</p> <p>I realize that the bottoms of the cards are visible in the tray. You should just make sure no one can see the back side of the tray. Putting another wall would make it too hard to bury the cards.</p> <p>Print four of the stands and glue them to the bottom of the tray. The tabs are meant to be attached to the bottoms of the two middle dividers. Print three of them. They might not need to be glued. They are used to keep the cards from slipping out of the tray. Finally, string a rubber band around the tray to keep the cards from falling forward.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK3</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> </p></p> Category: Games