Benchy Display Platform Prusa I3 MK3

prusaprinters

<p>Show off your best or favorite 3D Benchy. This was just a quick Tinker Cad design. It seems to work well on either side and Benchy hasn't fallen off after 48 hours of printing so I'll call it a success.</p> <h3>Print instructions</h3><h3>Licence: Creative Commons - Attribution - Non-Commercial Category: 3D Printer Accessories Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo">i3 MK3</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Notes:</strong></p> <p>This seems to work best printed on its side with supports under the wedge and hex that lock into the top of the Z axis.</p> <p><strong> Edit May 2nd, 2018</strong> The one I have printed on its side has curled slightly in the last week. The one printed flat with supports under the entire bottom has not curled. Printed flat is a lot more support material but may be better long term and the finish on the bottom surface really doesn't matter much to me.<br/> It could also just be the cheep PLA I used for the prototypes is the issue with the curling and better PLA or PETG would not have the issue.</p>