Bench Power Supply SFX conversion

prusaprinters

<p>This is a Bench Power supply enclosure for an SFX form factor computer power supply conversion. It could be used as a project box also.</p> <p>I designed it to be screwed together with common computer screws, 2.8mm pilot and 3.5mm clearance. Everything fits well and shouldn't need any cleanup, except the holes. I made a solid layer at the holes to make it more printer friendly.</p> <p>Have fun with it, let me know how it goes if you make one. :)</p> <h3>Print instructions</h3><h3>Category: Electronics Print Settings</h3> <p><strong>Printer:</strong> Anet A8</p> <p><strong>Supports:</strong> Doesn't Matter</p> <p><strong>Resolution:</strong> 0.25mm</p> <p><strong>Infill:</strong> 10%</p> <p><strong>Notes:</strong></p> <p>It may print okay without supports. I printed with supports.</p> <p>There is only one side model, mirror in your slicer for the opposite side.</p> <p>I printed with three top and bottom layers and one perimeter, Two or three would be better quality with more filament used. Mine turned out fine with one perimeter though.</p> <p>My bed is 220 x 220. The front and rear face plates used the whole bed. I rotated them 45 degrees for the print.</p>